Barre stampate in PTFE
PTFE molded rods are manufactured using compression molding technique. The process involves selecting high-grade PTFE material, preheating, molding, and subjecting to the sintering process producing molded PTFE rods.
Ordinarily, it is virtually impossible to use a normal injection molding process to make PTFE molded rods since materiale in politetrafluoroetilene will “not flow”.
PTFE Teflon Molded Rods Supplier in China
Molding PTFE rods does not alter the inherent properties of polytetrafluoroethylene. The PTEF molded rods are:
- Thermal resistant with working temperature between -400 and +550°F
- Chimicamente inerte
- Have non-stick property
- Offer better insulation
Depending on application requirements, you may choose virgin PTFE molded rods or filled PTFE molded rods.
Molded PTFE Rods Use
In most cases, the PTFE molded rods are machining stock where you process the PTFE rods further to make other parts. The parts may include gaskets, rollers, bearings, washers, seals, and machine parts.
- Tabella delle prestazioni
- Scheda tecnica
| PESO SPECIFICO: | 2.16-2.19 | g/cm3 |
| RESISTENZA ALLA TRAZIONE: | 30±3 | MPA |
| ALLUNGAMENTO: | 350±50 | % |
| DENSITÀ APPARENTE: | —— | g/l |
| DUREZZA: | 54-60 | riva D |
| FLUSSABILITÀ: | —— | secondi/50 g |
| DIMENSIONE DELLE PARTICELLE MEDIA: | 25 | micron |
| RITIRO: | 2.2-3.6 | % |
| PRESSIONE | 350 | kg/cm2 |
| TEMPERATURA MASSIMA DI SINTERIZZAZIONE | 380 | °C |
| Outer Diameter | 12mm–1070mm |
| Height | 100mm-300mm |
Italian 
English 
Arabic 
Tibetan 
German 
Spanish 
French 
Hindi 
Indonesian 
Japanese 
Korean 
Dutch 
Portuguese 
Thai 
Russian 
Swedish 
Chinese